When a timber frame or wall is out of plumb, YAOCOS allows you to apply controlled pushing force to bring the frame into the correct position.Designed for timber construction, YAOCOS helps make frame adjustment easier, faster and more efficient.
01 — POSITION Set YAOCOS between the timber frame and a suitable support point. 02 — ADJUST Apply controlled force to push the frame into position. 03 — CHECK Check the frame with a level and make fine adjustments until it is plumb. 04 — SECURE Once the frame is correctly aligned, secure it according to your normal construction procedure.
•Residential timber framing •Timber frame construction •Wall frame alignment •Frame plumb adjustment •Prefabricated timber frame installation For 2×4 / 2×6 framing applications, please confirm compatibility with the specific construction method and YAOCOS configuration before use.
Equipped with newly developed Multi Hold Plate at both ends. Ensures secure hold in any location, from intersecting columns to flat floors!
Featuring an Air Brake system to control the descent speed of Frame. Significantly reduces malfunction risks and noise levels !
YAOCOS provides powerful and controlled force for adjusting timber frames. The maximum load capacity is 3.9 kN (400 kgf), allowing the tool to handle demanding frame adjustment applications. Maximum load capacity is a reference value. Always use the product within the specified operating conditions.
YAOCOS extends up to 4,000 mm to reach high or wide timber frames. After use, it can be collapsed to approximately 1,650 mm, making it easier to transport and store.
When the main unit bends out duriing operation, please stop use immediately as it may cause serious damage. (In this condition the main unit is subjected to a load of over 400kgf, exceeding its weight capacity)
Please use the lower Screw Shaft with an exposed length of 100mm or less. Exceeding 100mm may cause the main unit to become unstable, causing a significant danger.
Product Name : POWER ROD
Model Code : NK-4000YC
Max. Length : 4,000mm
Min. Length : 1,650mm
Weight : 7.6kg
Load capacity : 3.9kN (400kgf)
Product Name : Support Handle
Model Code : NK-YCHD
Weight : 0.5kg
A support handle to faciliate extension and retraction of the main unit.
